Neoflon? PFA AP-210Generic Name: 全氟烷氧基 (PFA) - 提供方: DAIKIN INDUSTRIES, Ltd.NEOFLON PFA AP-210 is excellent in melt flowability and is suitable for injection molding and extrusion molding.IntroductionAP-210 is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether.Good melt flowability while maintaining excellent properties of PTFE. It can be melt-molded as a thermoplastic resin by injection molding and extrusion molding.Excellent chemical resistance which is not affected by most of the chemicals.Excellent heat resistance. Continuous use temperature is 260°C.It retains flexibility without losing toughness under the environment from cryogenic to high temperature.Low dielectric constant and dielectric loss tangent in a wide range of temperature and fre shows high electrical resistance and dielectric strength.Nonflammable like POLYFLON PTFE and NEOFLON FEP.Excellent weather resistance. No properties change even when exposed outside for a long time.Non-stickiness. It shows excellent releasability and water repellency / oil repellency. 與典型值比較 - Upgrade to compare!單位: SI 總覽材料狀態已商用：當前有效資料 1Technical Datasheet (English)搜索 UL 黃卡DAIKIN INDUSTRIES, Ltd.Neoflon?供貨地區北美洲非洲和中東拉丁美洲歐洲亞太地區特性共聚物良好的柔韌性流動性高耐候性，良好耐化學品性能，良好耐熱性，高韌性良好加工方法擠出注射成型物理性能額定值單位制測試方法密度 / 比重2.14g/cm3ASTM D792熔流率（熔體流動速率） (372°C/5.0 kg)14g/10 minASTM D3307機械性能額定值單位制測試方法抗張強度31.0MPaASTM D1708伸長率 (斷裂)420%ASTM D1708熱性能額定值單位制測試方法連續使用溫度260°C熔融溫度306°CDSC
