Terluran? GP-22Acrylonitrile Butadiene StyreneINEOS Styrolution Group GmbH產品說明：Terluran GP-22 is an easy-flow, general purpose injection molding grade with high resistance to impact and heat distortion; intended for a wide range of applications, particularly in the housings sector.物性信息：基本信息特性高光抗撞擊性，良好良好的著色性流動性中等通用優(yōu)良外觀用途電器用具家用貨品汽車領域的應用通用外殼玩具衛(wèi)浴產品形式粒子加工方法注射成型多點數據Creep Modulus vs. Time (ISO 11403-1)Isochronous Stress vs. Strain (ISO 11403-1)Isothermal Stress vs. Strain (ISO 11403-1)Secant Modulus vs. Strain (ISO 11403-1)Shear Modulus vs. Temperature (ISO 11403-1)Specific Volume vs Temperature (ISO 11403-2)Viscosity vs. Shear Rate (ISO 11403-2)物理性能額定值單位制測試方法比重1.04g/cm3ASTM D792, ISO 1183熔流率（熔體流動速率）ASTM D1238    200°C/5.0 kg1.5g/10 minASTM D1238    220°C/10.0 kg19g/10 minASTM D1238溶化體積流率（MVR）    230°C/3.8 kg4.80cm3/10minASTM D1238    220°C/10.0 kg19.0cm3/10minISO 1133收縮率    流動0.40 到 0.70%ASTM D955    --0.40 到 0.70%ISO 294-4吸水率    飽和, 23°C1.0%ASTM D570, ISO 62    平衡, 23°C, 50% RH0.22%ISO 62硬度額定值單位制測試方法洛氏硬度 (R 級)103ASTM D785球壓硬度97.0MPaISO 2039-1機械性能額定值單位制測試方法拉伸模量2300MPaASTM D638, ISO 527-2抗張強度 (屈服, 23°C)45.0MPaASTM D638, ISO 527-2拉伸應變    屈服, 23°C2.6%ISO 527-2    斷裂2.6%ASTM D638標稱拉伸斷裂應變 (23°C)10%ISO 527-2彎曲模量2300MPaASTM D790彎曲強度65.0MPaASTM D790, ISO 178沖擊性能額定值單位制測試方法簡支梁缺口沖擊強度ISO 179    -30°C8.0kJ/m2ISO 179    23°C22kJ/m2ISO 179簡支梁無缺口沖擊強度ISO 179    -30°C100kJ/m2ISO 179    23°C180kJ/m2ISO 179懸壁梁缺口沖擊強度    -30°C59J/mASTM D256    -18°C100J/mASTM D256    23°C300J/mASTM D256    -30°C8.0kJ/m2ISO 180/A    23°C26kJ/m2ISO 180/A