阻燃級 PPO 基礎創新塑料(美國) SE1GFN3-701無溴 30%玻纖增強 電子/電氣領域NORYL? SE1GFN3 resinPolyphenylene Ether + PSSABIC Innovative Plastics30% 玻璃纖維增強材料產品說明：PPE+PS blend. 30% Glass reinforced. Non-brominated, non-chlorinated FR system. UL94 V1 listing. RTI 110/105/110. Dielectric strength. Dimensional stability. Suitable for E/E applications.物性信息：基本信息黃卡編號E121562-221216填料/增強材料玻璃纖維增強材料, 30% 填料按重量添加劑阻燃性特性Chlorine Free尺寸穩定性良好無溴阻燃性用途電氣/電子應用領域加工方法注射成型多點數據Coefficient of Thermal Expansion vs. Temperature (ASTM E831)Elastic Modulus vs Temperature (ASTM D4065)Flexural DMA (ASTM D4065)Specific Heat vs. Temperature (ASTM D3417)Tensile FatigueTensile Stress vs. Strain (ASTM D638)Thermal Conductivity vs. Temperature (ASTM E1530)Viscosity vs. Shear Rate (ASTM D3835)物理性能額定值單位制測試方法比重1.31g/cm3ASTM D792收縮率 - 流動 (3.20 mm)0.10 到 0.40%內部方法吸水率 (24 hr)0.060%ASTM D570硬度額定值單位制測試方法洛氏硬度 (L 計秤)108ASTM D785機械性能額定值單位制測試方法抗張強度 1(斷裂)121MPaASTM D638伸長率 2(斷裂)5.0%ASTM D638彎曲模量 3(100 mm 跨距)7790MPaASTM D790彎曲強度 4(屈服, 100 mm 跨距)172MPaASTM D790沖擊性能額定值單位制測試方法懸壁梁缺口沖擊強度ASTM D256    -40°C96J/mASTM D256    23°C120J/mASTM D256熱性能額定值單位制測試方法載荷下熱變形溫度ASTM D648    0.45 MPa, 未退火, 6.40 mm141°CASTM D648    1.8 MPa, 未退火, 6.40 mm135°CASTM D648線形熱膨脹系數 - 流動 (-40 到 95°C)2.5E-5cm/cm/°CASTM E831RTI Elec110°CUL 746RTI Imp105°CUL 746RTI110°CUL 746電氣性能額定值單位制測試方法介電強度 (3.20 mm, in Oil)21kV/mmASTM D149介電常數ASTM D150    50 Hz315ASTM D150    60 Hz315ASTM D150耗散因數ASTM D150    50 Hz2.0E-3ASTM D150    60 Hz2.0E-3ASTM D150耐電弧性 5PLC 6ASTM D495相比耐漏電起痕指數(CTI)PLC 3UL 746高電弧燃燒指數(HAI)PLC 2UL 746高電壓電弧起痕速率 (HVTR)PLC 4UL 746熱絲引燃 (HWI)PLC 0UL 746可燃性額定值單位制測試方法UL 阻燃等級UL 94    1.47 mmV-1UL 94    5.99 mmV-0UL 94極限氧指數36%ASTM D2863